Jump to Navigation
Metal Finishing Systems Equipment supplies solutions Denver Englewood Colorado Metal Finishing Systems Equipment supplies solutions Denver Englewood Colorado

when it comes to metal finishing equipment
we've got you covered

3M

Click on any image for more details.

Adobe Reader is required to view product specs.
Download it here.

Product Specs
Stikit™ Abrasive Discs

3M

Recommended Operating Speed (SFPM):

  • Decorative Finishing: 500-3000
  • Composites/Soft Materials: 1200-2700
  • Cleaning and Conditioning: 2000-5000
  • Prepolishing: 2000-7000
  • Oxide Removal: 4500-6500
  • Deburring: 5000-6500
  • Blending/Polishing: 6000-8000
  • Cut-down Prior to Buffing: 7000-8500

Ask about our stocking programs!

Request a quote
Utility Cloth Sheets and Rolls

3M

Tough aluminum oxide mineral bonded to cloth with 3M’s heat resistant Resinite™ system. This special bonding technique allows for a more uniform coating. Your advantage is a consistent scratch pattern.Get the "TRUE BLUE" advantage in all operations: contour sanding, strapping, deburring, rust removal, cut-down prior to polishing, all general maintenance work.

Request a quote
PG™ Wheels

3M

3M™ PG wheels deliver a consistent finish and a uniform rate of cut. They are non-loading, non-glazing and non-dulling. As they are used the flaps wear away to continually expose new abrasive. PG wheels can be shaped to fit any desired contour, even a compound radius. There is a full line of accessories that complements the PG wheel line to give you the best possible finish in the least time.

Request a quote
Trizact™ Abrasive

3M

Structured abrasive belts used for fine finishing stainless steel, chromium, nickel and cobalt-based materials. Structured abrasives feature an engineered surface of microscopic three-dimensional structures resembling pyramids. This precise and consistent abrasive surface is ideal for stainless steel applications requiring a fine finish.

Request a quote
3M Hand Tools

3M

Download the product list of 3M hand tools. Disc Sanders, Die Grinders, Inline Sanders and Cut-Off Wheel Tools.

Request a quote
Fibre Discs

3M

New 3M Cubitron™ II Fibre Disc 982CCubitron™ II Fibre Discs are made with revolutionary 3M precision-shaped ceramic grain technology, engineered with ultra-sharp, fast cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life. Cubitron™ II leaves today’s ceramic technologies behind with increased cut rates and life.Faster cut rates with less pressure for longer periods of time provide you with:• Increased productivity• Increased throughput• A more comfortable work environment• Lower cost/grind

Request a quote
Radial Bristle Brushes

3M

Excellent replacement for wire brushes • Use on bench motors for general purpose cleaning applications • No flying wires yet higher cut rates • Very strong and flexible • Comes complete with adapters for multiple shaft sizes (3/8”, 1/2”, 5/8”, 3/4”, 1”, and 2”) Grade: 36 - Dark Brown; 50 - Green; 80 - Yellow

Request a quote
Roloc™ Discs

3M

Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions. They lock securely in place with just half a twist...a half twist and it’s off. Each disc is color coded by grade. Ideal for use on air tools (right angle and straight) and on flexible shaft grinders. Additionally, Roloc™ discs and pads feature three different types of fastening systems to accommodate most any stock that you may currently have on hand.

Request a quote
Mandrels

3M

Mandrels are corrosion protected and machined to industrial standards of thread size and shaft diameters. They are designed for use with Scotch-Brite Unitized Wheels. Mandrels are furnished complete with washers to fit available wheel sizes.

Request a quote
Cartridge Rolls

3M

Stocking Diameters: 1/2 x 1 1/2; 3/4 x 1 1/2; 1 x 1 1/2. Full taper and regular.

Request a quote
Belts

3M

Stocking

  • 1/2 and 3/4 x 18
  • 1/2 x 24
  • 1 x 42
  • 2 x 48
  • 3 x 15 1/2
  • 3 x 25 7/32
  • 3 x 132
  • 4 x 36
  • 6 x 48
  • 6 x 158
  • 6 x 164
  • 6 x 264
  • 6 x 300
  • 37 x 60 wide belts
  • 37 x 75 wide belts

Request a quote
Multi-Finishing Wheel

3M

The wheel for producing uniform grain finishes on stainless steel and other metals. Multi-finishing wheels are highly conformable, soft wheels that create uniform and attractive final finishes on ferrous and non-ferrous metals. They are tough enough to finish edges and welds and soft enough to final finish large surfaces.

Request a quote
Roloc™ Surface Conditioning Discs

3M

Scotch-Brite Roloc™ discs provide a burr-free surface suitable for painting or coating. These discs can also be used for removal of light rust, oxides, and coatings. Color: A VFN - Blue; A MED - Maroon; A CRS - Brown

Request a quote
Scotch-Brite™ Surface Conditioning Belts

3M

Scotch-Brite™ surface conditioning belts are used worldwide to finish, polish and buff metal, wood and plastic surfaces. Scotch-Brite™ surface conditioning belts refine rough surfaces with little or no dimensional change to the workpiece, and they can finish the job in fewer steps than conventional products, while generating a uniform scratch pattern.

Request a quote
Surface Conditioning Products

3M

Mineral, Resin and Fiber: Building Blocks for Scotch-BriteTM Surface Conditioning Products. Synthetic fibers and abrasive particles are combined and bonded to form a conformable, three-dimensional, open web material. The exceptional performance characteristics of this open web technology have been demonstrated time after time in countless factories and shops.

Request a quote
High Strength Discs

3M

High strength discs are designed to do light deburring, oxide and light coating removal, stainless steel finishing and satin finishing of aluminum extrusions. These are highly conformable, long-lasting discs.

Request a quote
Scotch-Brite Hand Pads and Rolls

3M

When surfaces need to be cleaned, scuffed, deburred or finished by hand, Scotch-Brite hand pads and rolls outperform steel wool, wire brushes and other non-woven hand pads. The material cuts fast and leaves a more consistent finish than these other abrasives. Scotch-Brite material will never rust and can be used with water or solvents. Truly your best choice for cleaning and finishing surfaces by hand. The world’s leading surface conditioning products.

Request a quote